00 gauge plug help

Discuss all things ear stretching
Post Reply
rebel_logan_24
Posts: 32
Joined: Wed Jan 19, 2011 9:12 pm
Gauge Size:: currently 8g goal 0g

00 gauge plug help

so i am taping to 0g 8mm as we speak but i was looking around at some 00 gauge plugs and notice a lot of 9mm and 10mm 00gauge plugs which one is 00g and are the 9mm plugs like a stepping stone like the 1g 7mm plugs im taping from now?
ViolentJayne
Posts: 420
Joined: Thu Feb 24, 2011 7:33 pm
Gauge Size:: ears 4ga
2nd lobe hole 12
Contact:

Re: 00 gauge plug help

its just because the gauge system is really flawed thats why its best to just go with mm .. some companies call oog 10mm some call it 9mm you just have to be careful and look at the mm . there are even differences like that in smaller sizes . Im at 4 ga and most places call that 5mm but Ive seen some places call it 5.2 mm ...

the term gauge wasnt started for measuring earrings it was started for wires I believe ( could be wrong ) but thats why the increases arent even either
4ga lobes ,14ga 2nd hole lobes. 14ga tounge
full sleeve and 7 other Tattoos

SHE'S ALWAYS NICE
AND GIVES ADVICE
WHEN WE DONT HAVE A CLUE
SHE NEEDS NO HELP
FROM YOU
Image
ast.riske
Posts: 329
Joined: Wed Aug 24, 2011 8:01 pm
Gauge Size:: 4g lobes, 8g septum

Re: 00 gauge plug help

Jayne, yep. The gauge system is intended for wire. So, if you buy metal barbells they should be accurate to gauge as it is a standard. If you buy anything else, it is likely measured to some approximation of the gauge size, or just whatever they feel like. If you go by mm measurement you are far more likely to get jewelry that is sized accurately. : )
Battle not with monsters lest ye become a monster; and if you gaze into the abyss the abyss gazes into you.
-Fredrick Nietzsche

Pericings:
2g Lobes
6g Septum

Want:
Frenulum Linguae
Left inner conch
Right helix
corazon_de_oro
Posts: 1743
Joined: Sun Dec 20, 2009 12:21 am
Gauge Size:: 00G
Location: Huntington, WV
Contact:

Re: 00 gauge plug help

Some 00G is 9mm, some is 9.5mm, and some is 10mm, so it's extremely confusing.
What I did was I just made sure the 00G plugs I stretched with were 9mm. Some websites (like Body Art Forms) specify the millimeters on certain plugs. For example, I stretched with these: http://www.bodyartforms.com/productdeta ... 6&index=20 (they have them in lots of different colors) and they have both 9mm and 10mm. If you see 00G plugs that don't have the millimeters specified, they're most likely 9.5/10mm.

00G is my goal size, so I'm just treating 9mm like a separate size, kind of like 7mm. When I get to 10mm I'll still wear 9/9.5mm stuff if I can.
I'm Lindsay.
I have 1/2" lobes and 11 piercings: left helix x2, both conches, both nostrils, septum, navel, and VCH.
My lobes are small but I know a lot about stretching and how to do it safely, so message me if you have any questions!
rebel_logan_24
Posts: 32
Joined: Wed Jan 19, 2011 9:12 pm
Gauge Size:: currently 8g goal 0g

Re: 00 gauge plug help

thanks so much! so basically 10mm is 00 gauge and 9/9.5mm is like a 1 gauge plug? good that what i needed to know
corazon_de_oro
Posts: 1743
Joined: Sun Dec 20, 2009 12:21 am
Gauge Size:: 00G
Location: Huntington, WV
Contact:

Re: 00 gauge plug help

Well, 00G CAN be 9, 9.5, or 10mm but it's usually 9.5 or 10. So it's best to make sure the first 00G plugs you get are 9mm, and keep that size in for 6-8 weeks like you would any other stretch.
I'm Lindsay.
I have 1/2" lobes and 11 piercings: left helix x2, both conches, both nostrils, septum, navel, and VCH.
My lobes are small but I know a lot about stretching and how to do it safely, so message me if you have any questions!
Post Reply